Measurement Systems - forefront of the data acquisition market
Username: Password: Buy On-Line   
Products
NSM-206FCS 4 port Ethernet + Dual Fibre Switch (SC)-Rugged- 15km £342.00

The NSM-206FCS (SC Connector; Single-mode) is a Unmanaged 4-Port Industrial 10/100 Base-T(X) with Dual 100 Base-FX Switch that secures data transmission by using fibre optic transmission to provide immunity from EMI/RFI interference. It can be used for transmitting an Ethernet signal up to 15 Km, and is the perfect solution for applications where transmission must be protected from electrical exposure, surges, lightning or chemical corrosion.

The NSM-206FCS operates at full duplex mode. In full duplex mode, range is 15km with 8.3/125, 8.7/125, 9/125 or 10/125 μm fibre cables.

The NSM-206FCS can extend your LAN in a daisy chain configuration. Please refer to the User manual.

NSM-206FCS provides two power inputs that can be connected simultaneously to live DC power sources. If one of the power inputs fails, the other live source acts as a backup to automatically support the NSM-206FCS's power needs.

This unit is supplied in an IP20 rugged, high-strength steel case capable of either DIN-Rail or Wall Mounting.

 
Quantity:     

Features

  • Automatic MDI / MDI-X crossover for plug-and-play
  • Each port supports both 10/100 Mbps speed auto negotiation
  • Store-and-forward architecture
  • Full duplex IEEE 802.3x and half duplex backpressure flow control
  • 1.6 Gbps high performance memory bandwidth.
  • Redundant +10 ~ +30Vdc voltage
    Power failure alarm by relay output
  • Supports operating temperatures from 0 ~ +70°C
  • IP20 rugged hugh-strength metal case
  • DIN rail mount for industrial usage and screw hole for wall mounting
    		•

    Specifications

    Technology

  • Standards : IEEE802.3, 802.3u, 802.3x
  • Processing Type : Store & forward wire speed switching - no delays
  • MAC Addresses : 1024
  • Memory Bandwidth : 1.6 Gbps
  • Flow Control : IEEE802.3x flow control, back pressure flow control

    • Interface

  • RJ45 Ports : 10/100 Base-T(X) auto negotiation speed, F/H duplex mode,
    and auto MDI/MDIX connection
  • Fibre Optic Port : 100 Base-FX (Single-mode, SC Connector)
  • LED Indicators : 10/100M, Link/Act, Full/Half Duplex (Fibre port)
  • Ethernet isolation : 1500 Vrms 1 minute
  • Frame Ground for EMS Protection : Yes
  • Fibre Optic : Single-mode fibre cables : 8.3/125, 8.7/125, 9/125 or 10/125µm
    Distance : 15km (9/125µm recommended) for full duplex
    Wavelength : 1300 or 1310 nm
    Min. Tx Output : -15 dBm
    Max. Tx Output : -8 dBm
    Rx Sensitivity : -36 to -31 dBm
  • Cable : Ethernet : 2-pair UTP/STP Cat.3,4,5, EIA/TIA-568 100-ohm
    Fast Ethernet : 2-pair UTP/STP Cat. 5, EIA/TIA-568 100-ohm

    • Power

  • Redundant Input Range : +10 ~ +30VDC (Non-isolation)
  • Alarm Contact : one relay output with current carrying capacity of 2A @ 30Vdc
  • Power Consumption : 0.24A@24VDC, +/- 5% arrowed with 100M Full duplex.
  • LED Indicator : Power Input 1, Power Input 2, Power Fail
  • Protection : Power reverse polarity protection
  • Frame Ground for EMS Protection : Yes
  • Connection : 7-Pin Removable Terminal Block

    • Mechanical

  • Case : Metal
  • Environmental Rating : IP20
  • Dimensions : 72.5mm x 110mm x 102mm (W x H x D)
  • Installation : DIN Rail Mount, Wall Mounting

    • Environmental

  • Operating Temperature : 0 to 70 °C
  • Storage Temperature : -20 to 85 °C
  • Ambient Relative Humidity : 10% to 90% non-condensing
    		•

    Technical

    User Manual

    Recommendations

    Power Supplies
    Terms of Use | Privacy Policy | Resources | How to Order | Site Map