NS-205FCS Unmanaged 4-port Industrial Ethernet Switch with Fibre Switch (SC)

NS-205FCS 4 port Ethernet + Fibre Switch (SC) - 15km

£233.00

he NS-205FCS (SC Connector; Single-mode) is a Unmanaged 4-Port Industrial Ethernet(10/100Base-TX) to Fibre Optics(100Base-FX) converter that secures data transmission by using fibre optic transmission to provide immunity from EMI/RFI interference. It can be used for transmitting an Ethernet signal up to 15 Km, and is the perfect solution for applications where transmission must be protected from electrical exposure, surges, lightning or chemical corrosion.

The NS-205FCS operates at full duplex mode. In full duplex mode, range is 15km with 8.3/125, 8.7/125, 9/125 or 10/125 μm fibre cables.

The Ethernet supports 10/ 100M auto-negotiation feature and auto MDI /MDIX function.

NS-205FCS 4 port Ethernet + Fibre Switch (SC) - 15km

Quantity:

Features

Automatic MDI / MDI-X crossover for plug-and-play

Each port supports both 10/100 Mbps speed auto negotiation

Store-and-forward architecture

Full duplex IEEE 802.3x and half duplex backpressure flow control

3.2 Gbps high performance memory bandwidth.

Frame buffer memory : 512 Kbit

Integrated look-up engine with dedicated 1K unicast MAC addresses.

Supports +10~+30Vdc voltage

Supports operating temperatures from 0 ~ +70°C

DIN rail mount for industrial usage

Specifications

Technology

Standards : IEEE802.3, 802.3u, 802.3x

Processing Type : Store & forward wire speed switching - no delays

MAC Addresses : 1024

Memory Bandwidth : 3.2 Gbps

Flow Control : IEEE802.3x flow control, back pressure flow control

Interface

RJ45 Ports : 10/100 Base-T(X) auto negotiation speed, F/H duplex mode,
and auto MDI/MDIX connection

Fibre Optic Port : 100 Base-FX (Single-mode, SC Connector)

LED Indicators : 10/100M, Link/Act, Full/Half Duplex (Fibre Port)

Ethernet isolation : 1500 Vrms 1 minute

Frame Ground for EMS Protection : Yes

Fibre Optic : Single-mode fibre cables : 8.3/125, 8.7/125, 9/125 or 10/125µm
Distance : 15km (9/125µm recommended) for full duplex
Wavelength : 1300 or 1310 nm
Min. Tx Output : -15 dBm
Max. Tx Output : -8 dBm
Rx Sensitivity : -36 to -31 dBm

Cable : Ethernet : 2-pair UTP/STP Cat.3,4,5, EIA/TIA-568 100-ohm
Fast Ethernet : 2-pair UTP/STP Cat. 5, EIA/TIA-568 100-ohm

Power

Input Voltage Range : +10 ~ +30VDC (Non-isolation)

Power Consumption : 0.14A@24VDC, +/- 5% arrowed with 100M Full duplex.

LED Indicator : Yes

Protection : Power reverse polarity protection

Frame Ground for EMS Protection : Yes

Connection : 5-Pin Removable Terminal Block

Mechanical

Case : Plastic

Flammability : UL94V-0

Dimensions : 64mm x 110mm x 98mm (W x H x D)

Installation : DIN Rail Mount

Environmental

Operating Temperature : 0 to 70 °C

Storage Temperature : -20 to 85 °C

Ambient Relative Humidity : 10% to 90% non-condensing

Technical

User Manual

Recommendations

Power Supplies