-
tGW-735 Modbus TCP to Modbus RTU/ASCII gateway (3xRS485)tiny Modbus TCP to Modbus RTU / ASCII gateway with a three RS485 ports.(Price excludes VAT)
- £108.00
- £108.00
- (-0%)
- Unit price
- per
-
tGW-715 Modbus TCP to Modbus RTU/ASCII gateway (1xRS422/RS485)tiny Modbus TCP to Modbus RTU / ASCII gateway with a single RS422 / RS485 port.(Price excludes VAT)
- £96.00
- £96.00
- (-0%)
- Unit price
- per
-
SG-3383 3-channel DC Current Signal Splitter3 Channel 4-20mA DC Current signal Splitter unit(Price excludes VAT)
- £139.00
- £139.00
- (-0%)
- Unit price
- per
-
I-7561U USB to RS232/422/485 ConverterThe I-7561U is a cost-effective module to transfer serial data over USB allowing you to connect your serial devices using a USB interface. Includes support for Windows® and Linux(Price excludes VAT)
- £105.00
- £105.00
- (-0%)
- Unit price
- per
-
USB-1608G 16-Bit, 250 kS/s, Multifunction USB Data Acquisition DeviceUSB-based 16-channel, 250 kS/s data acquisition device with eight digital I/O, two 32-bit counter inputs, and one timer output.(Price excludes VAT)
- £362.00
- £362.00
- (-0%)
- Unit price
- per
-
tGW-715i Isolated Modbus TCP to Modbus RTU/ASCII gateway (1xRS422/RS485)tiny Isolated Modbus TCP to Modbus RTU / ASCII gateway with a single RS422 / RS485 port.(Price excludes VAT)
- £108.00
- £108.00
- (-0%)
- Unit price
- per
-
RM1-AB 0-10V to relay output, adjustable trippoint moduleRelay module that allows a 0-10V signal to trigger an SPCO Relay output, with adjustable setpoint.(Price excludes VAT)
- £16.00
- £16.00
- (-0%)
- Unit price
- per
-
I-7514U 4-channel RS485 Repeater/Hub/Splitter4-channel RS-485 Active Star Hub, providing 4 independant RS485 Output channels and a single input channel. Other features include RS485 short circuit protection, internal jumper selectable termination resistors, LED indicators for power and network traffic.(Price excludes VAT)
- £121.00
- £121.00
- (-0%)
- Unit price
- per
-
M-7055D Isolated Digital I/O Module 8/8 ch, LED (ModBus_DCON Protocol)Isolated Digital Input (8 channel) / Digital Output (8 channel) unit, supporting ModbusRTU or DCON protocol. Inputs can be set as 16-bit counters. Each channel has a Status indicating LED.(Price excludes VAT)
- £129.00
- £129.00
- (-0%)
- Unit price
- per
-
ET-7018Z Ethernet I/O Module 10 Thermocouple IP + 6 DigOEthernet based Data Acquisition I/O module offering 10 Thermocouple Inputs plus 6 Digital Outputs. Has integrated Web Server with configurable HMI screens. It can also communicate with SCADA and other monitoring systems via use of ModBus TCP protocol.(Price excludes VAT)
- £269.00
- £269.00
- (-0%)
- Unit price
- per
-
I-7510A RS-485/RS-422 high speed Isolated repeaterThis RS-485/RS422 high speed Isolated repeater can be used to boost the signal and provide isolation between different sections of a network. It is also able to convert between 4-wire RS422 and 2-wire RS485.(Price excludes VAT)
- £85.00
- £85.00
- (-0%)
- Unit price
- per
-
CAN-2060C CANopen Slave Module, 4 Isolated (Wet, Dry) DI, 4 Relay OutputsCANopen Slave Module with 4 Isolated (Wet, Dry) Digital Inputs and 4 Relay Output channels(Price excludes VAT)
- £167.00
- £167.00
- (-0%)
- Unit price
- per
-
CAN-2057C CANopen Slave Module, 16 Isolated (Sink, NPN) DO channelsCANopen Slave Module with 16 Isolated (Sink, NPN) Digital Output channels(Price excludes VAT)
- £157.00
- £157.00
- (-0%)
- Unit price
- per
-
USB-1608FS-Plus 16-Bit, 400 kS/s, Multifunction USB Data Acquisition DeviceUSB-based multifunction data acquisition device with 8 SE simultaneous analog inputs, 16-bit resolution, 400 kS/s sampling, and 8 digital I/O.(Price excludes VAT)
- £390.00
- £390.00
- (-0%)
- Unit price
- per
-
tM-SG4 RS-485 Pull-high/Pull-low and Termination Resistor ModuleModule with selectable termination and pull-up/pull-down resistors to improve RS485 communication(Price excludes VAT)
- £26.00
- £26.00
- (-0%)
- Unit price
- per
-
ET-7026 Ethernet I/O Module 6 AnaI, 2 AnaO, 2 DigI/Count + 2 DigOEthernet based Data Acquisition I/O module offering 6 Analogue Inputs, 2 Analog Outputs, 2 Digital Inputs / Counters and 2 Digital Outputs. Has integrated Web Server with configurable HMI screens. It can also communicate with SCADA and other monitoring systems via use of ModBus...(Price excludes VAT)
- £258.00
- £258.00
- (-0%)
- Unit price
- per
-
ET-7015 Ethernet I/O Module 7ch RTD InputEthernet based Data Acquisition I/O module offering 7 Analogue RTD Inputs for monitoring 2 or 3 wire devices. Has integrated Web Server with configurable HMI screens. It can also communicate with SCADA and other monitoring systems via use of ModBus TCP protocol.(Price excludes VAT)
- £231.00
- £231.00
- (-0%)
- Unit price
- per
-
DB-16R 16-channel Relay Output BoardThe DB-16R 16 channel Relay Output Board consists of 16 form C relays for efficient switch of load by programmed control.(Price excludes VAT)
- £110.00
- £110.00
- (-0%)
- Unit price
- per
-
DB-16P 16-channel Bi-direction Isolated Input BoardThe DB-16P is a 16 channel isolated digital input daughter board for A-82X board or any 812pg,711 726 , 720 series board, and PCI-Bus Multi-function board.(Price excludes VAT)
- £72.00
- £72.00
- (-0%)
- Unit price
- per
-
SG-3013 Isolated RTD Input Signal ConditionerThe SG-3013 is a RTD input signal conditioning module to transform RTD input to voltage or current output. SG-3013 uses a microprocessor-based transducer, which integrating two high resolution ADCs and an MCU, to acquire the RTD signal.(Price excludes VAT)
- £131.00
- £131.00
- (-0%)
- Unit price
- per
