7011-M Modbus Master to Datascan Interface module

The Datascan 7011-M Modbus™ Gateway module allows the Datascan 7000 network to be connected to a host computer running SCADA Packages using the Modbus ASCII Master Protocol (7 or 8 bit support). This provides the ability for the Modbus Package to configure, read and write to Datascan Channels.

  • Connects SCADA packages running Modbus? ASCII Master Protocol to the Datascan 7000 Network
  • Upto 38k4 Baud Data Transfer
  • 500V Isolation from Network
  • Compact DIN-Rail Mounting
  • RS485 Network
    Transmission Rate : 93.75kBaud
    Data Rate : 1000 results/sec
    Total Channels/network : 1000
    Max. No. of nodes (processors) : 32
    Max. Network Length : 1.2 km (4000 ft)
    Isolation : 500Vdc
  • RS232 Port
    Baud Rates : 4800, 9600, 19k2, 38k4
    Isolation : 500Vdc
    Max Distance (direct) : 10m to host
  • Recommended Network Cable
    Belden 9207 : upto 1.2km
    Belden 8761 : upto 300m
  • Power Requirements:
    24V AC or DC @ 500mA
    Battery Backup life : 5 Years (unpowered)
  • Dimensions : 230 W x 80 D x 123 H (mm)
    Weight : 600g
  • Environmental:
    Operating Temp.Range : -10 to +60 °C
    Storage Temp. Range : -20 to +80 °C
    Relative Humidity : 90% non-condensing
£550.00
7011-M Modbus Master to Datascan Interface module