PCI-1202HU Multifunction 32Ch. 12-bit 44ks/s High

• Description
• Features
• Specifications
• Technical

The PCI-1202 series is a family of high performance data acquisition boards.

It features a continuous, 110KHz for low gain (40KHz for high gain), gap-free data acquisition under DOS and Windows. The PCI-1202 family has the same hardware architecture as PCI-1802, and provides 32-channel single-ended or 16-channel differential analog inputs. Like the PCI-1802 family, the PCI-1202 series features " Magic Scan" function, M-function, X-function, and Continuous Capture function.

The PCI-1202LU/HU Universal PCI card supports both 5V and 3.3V. The PCI-1202LU/HU (Universal PCI version) is fully compatible with the older PCI-1202L/H (PCI version), while also having an improvement in D/I pull-high/low design. 

Includes one CA-4002 D-Sub connector.

Features

• 12-bit 110KHz A/D converter
• 32 single-ended/ 16 differential inputs, 1K word FIFO buffer
• The total sampling rate is 110K samples/s for low gain model and 40K samples/s for high gain model.
• Three different external trigger : post-trigger, pre-trigger, middle trigger
• 16 digital input / 16 digital output channels
• PCI-1202LU provides programmable low gain: 0.5, 1, 2, 4, 8.
• PCI-1202HU provides programmable high gain: 0.5, 1, 5, 10, 50, 100, 500, 1000.
• Internal / external trigger.
• Two 12-bit independent programmable DAC.; 2 MHz throughput per channel (max.)
• 2.7 M word /high speed data transfer rate.
• Universal PCI card, supports both 5V and 3.3V PCI bus.
• Digital input port can be set to pull-high or pull-low.

Software

Analog Input Specifications

• Input channel: 32 Single Ended or 16 Differential (jumper setting)
• Resolution : 12-bit
• ADC Conversion Rate : 110ks/s
• Sampling rate : 44ks/s
• Input Impedance : 10Mohm//6pF
• Over voltage protection : +/- 35V
• Linearity : +/- 1 bit
• On board FIFO : 1K.
• Interface : Universal PCI Bus

PCI-1202HU Input Range & Bipolar Unipolar Throughout

Gain	0.5	1	5	10	50	100	500	1000
Bipolar(V)	+/-10	+/-5	+/-1	+/-0.5	+/-0.1	+/-.05	+/-.01	+/-.005
Unipolar(V)		0~10		0~1		0~0.1		0~0.01
Sampling rate	44KS/s	44KS/s	44KS/s	44KS/s	10KS/s	10KS/s	1KS/s	1KS/s

Analog Output Specifications

• Channels : 2
• Type : 12-bit Double Buffers
• Linearity : 0.06% FS
• Settling time : 0.4µs
• Output Range : -5V ~ +5V or -10V~+10V
• Output Driving : +/-5mA

Digital I/O

• Input : 16-channel TTL levels
  Low : V_IL = 0.8V max., I_IL = -0.4mA max
  High : V_IH = 2V min., I_IH = 20µA max
• Output : 16-channel TTL levels
  Low : V_OL = 0.5V max., I_OL = 8mA max
  High : V_OH = 2.7V min., I_OH = 0.4mA max

Timer

• Three 16-bit independent timers, 8Mhz input clock
• Internal Pacer timer
• External Pacer timer
• Machine independent timer

General

• I/O Connector : 1x 37-pin D-sub female + 2x 20-pin ribbon male
• Power Requirements : +5V@350mA(Max.)
• Operating temperature : 0~50°C
• Storage temperature : -20~70°C
• Humidity : 0~90% RH, non-condensing
• Dimensions : 200mm x 105mm

PCI Multifunction Boards (Datasheet)