PCI-1002LU Multifunction 32Ch. 12-bit 110ks/s Low

The PCI-1002 series is a family of A/D board for PC with PCI bus. It features a 110KHz for low gain model (44KHz for high gain model) data acquisition under DOS and Windows The PCI-1002HU/LU provides 32 single-ended or 16 differential inputs, 16 digital input and digital output channels. The -H means high gain model and the -L means low gain model. The PCI-1002 series provide three flexible external trigger modes, pre-trigger, post-trigger and middle-trigger.

The PCI-1002LU/HU Universal PCI card supports both 5V and 3.3V Buses. The PCI-1002LU/HU (Universal PCI version) is fully compatible with the older PCI-1002L/H (PCI version).

Includes one CA-4002 D-Sub connector.

  

  • PCI bus (v2.1), 33MHz 5V 32-bit.
  • Universal PCI card, supports both 5V and 3.3V PCI bus.
  • Supports system on windows 98/NT/2K/XP 32-bit/2003 32-bit/Vista 32-bit.
  • 12bit resolution, 110KHz conversion sample rate AD converter.
  • 32 single-ended/ 16 differential inputs
  • The sampling rates of single channel or multiple channels is 110K samples/s for low gain model and 44k samples/s for high gain model.
  • Three different external trigger: pre-trigger, post-trigger and external pacer trigger.
  • 16 digital input / 16 digital output channels
  • 1002LU : programmable low gain:1, 2, 4, 8.
  • 1002HU: programmable high gain:1, 10, 100, 1000.
  • Internal / external trigger.
  • Half size board
  • Digital input port can be set to pull-high or pull-low.

Software

  • Toolkit for DOS
  • Toolkit for Windows 95/98
  • Toolkit for Windows NT
  • Toolkit for Windows 2000/XP
  • LabVIEW toolkit for Windows
  • Toolkit for OCX 95/98
  • Toolkit for OCX NT
  • Toolkit for OCX 2000/XP
  • Driver for LINUX
  • Driver for DasyLab

Analog Input Specifications

  • Input channel: 32 Single Ended or 16 Differential (jumper setting)
  • Resolution : 12-bit
  • ADC Conversion Rate : 110ks/s
  • Sampling rate : 110ks/s
  • Input Impedance : 10Mohm//6pF
  • Over voltage protection : +/- 35V
  • Accuracy : 0.01% of reading, +/- 1 bit
  • On chip sample & hold : Yes
  • Interface : Universal PCI Bus

PCI-1002LU Input Range (Low Gain)

     
    Gain
     
    1
    		 2 4 8
     
    Bipolar(V)
    +/-10
    +/-5
    +/-2.5
    +/-1.25
     
    Sampling rate
    110KS/s
    110KS/s
    110KS/s
    110KS/s

Digital I/O

  • Input : 16-channel TTL levels
    Low : VIL = 0.8V max., IIL = -0.4mA max
    High : VIH = 2V min., IIH = 20µA max
  • Output : 16-channel TTL levels
    Low : VOL = 0.5V max., IOL = 8mA max
    High : VOH = 2.7V min., IOH = 0.4mA max

Timer

  • One 16-bit machine independent timer for software (Timer 2).
  • Two 16-bit pacer timers for A/D converter and interrupt (Timer0, Timer1).

General

  • I/O Connector : 1x 37-pin D-sub female + 2x 20-pin ribbon male
  • Power Requirements : +5V@350mA(Max.)
  • Operating temperature : 0~50°C
  • Storage temperature : -20~70°C
  • Humidity : 0~90% RH, non-condensing
  • Dimensions : 188mm x 105mm
£208.00
PCI-1002LU 32Ch.AI, 12-bit 110ks/s, Dig I/O Low Gain Board