

PISO-P64 64Ch Isolated Digital Input Board
The PISO-P64 has 64 channels of optically isolated digital inputs, arranged into four banks.
Each input channel use a photo-coupler input which allows either internal isolated power supply or external power selected by jumper. Isolated input channels 0-15 are designed into group A, channels 16-31 are designed into group B, channels 32-47 are designed into group C and channels 48-63 are designed into group D. The power supply of the input port may use the external power or the power from the PC side using DC/DC converter. The board interface to field logic signals, eliminating ground-loop problems and isolating the host computer from damaging voltages.
The PISO-P64 has one 37-pin D-Sub Connector and one 40-pin male header. The 40-pin to DB37 flat cable is used to fix with the PC rear panel. The user can connect the digital signal through the second D-Sub connector. Each D-Sub connector contains 32 input channels.
Includes one CA-4037W cable (40-pin flat connector to 37-pin D-sub on Rear Panel) and two CA-4002 D-Sub connectors.
- 32-bit +5V PC compatible PCI bus, Plug and Play
- 64 Isolated Digital Input channels
- 3000Vdc Isolation Voltage
- DC/DC converter built-in
Software
- Toolkit for DOS
- Toolkit for Windows 95/98
- Toolkit for Windows NT
- Toolkit for Windows 2000/XP
- LabVIEW toolkit for Windows
- Toolkit for OCX 95/98
- Toolkit for OCX NT
- Toolkit for OCX 2000/XP
- Driver for LINUX
- Driver for Dasylab
|
|
|
Isolated Digital Input
- Number of channels: 32
- Type: photo coupler Isolated input
- Isolation Voltage: 3750V (using external power), 3000V (using internal power)
- Input voltage:
Logic '1' = AC/DC 5V ~ 30V
Logic '0' = AC/DC 0 ~ 1V - Input impedance: 3 Kohm (DC 24V, 7.67mA) for each channel
- Response time: 4KHz max.
General
- Power Requirements: +5V@400mA
- Operating temperature: 0~60°C
- Storage temperature: -20°C~70°C
- Humidity: 0 ~ 90% RH, non-condensing
- Dimensions: 180 mm x 105 mm













