PISO-P32A32 64Ch Isolated Digital I/O Board (curre

• Description
• Features
• Specifications
• Technical

TThe PISO-P32A32 has 32 channels of optically isolated digital inputs and 32 channels of optically isolated digital outputs, arranged into four isolated banks.

Each input channel use a photo-coupler input which allows either internal isolated power supply or external power selected by jumper. Each digital output offers a PNP transistor and integral suppression diode for inductive load. Isolated input channels 0-15 are designed into group A and channels 16-31 are designed into group B. Isolated output channels are designed into group C and Group D. The power supply of the input port may use the external power or internal power. The power supply of the output port should use the external power. This interface board is easily installed in any PC. The board interface to field logic signals, eliminating ground-loop problems and isolating the host computer from damaging voltages.

The PISO-P32A32 has one 37-pin D-Sub connector and one 40-pin male header. The 40-pin to DB-37 flat-cable includes a PC Rear Panel plate. The user can connect the digital signal through the second D-Sub connector. Each D-Sub connector contains 16 input channels and 16 output channels.

Includes one CA-4037W cable (40-pin flat connector to 37-pin D-sub on Rear Panel) and two CA-4002 D-Sub connectors.

• 32-bit +5V PC compatible PCI bus, Plug and Play
• 32 Isolated Digital Input and 32 Isolated Digital Output channels
• Source Current Output
• 3000Vdc Isolation Voltage
• DC/DC converter built-in

Software

Toolkit for DOS Toolkit for Windows 95/98 Toolkit for Windows NT Toolkit for Windows 2000/XP LabVIEW toolkit for Windows

Toolkit for OCX 95/98 Toolkit for OCX NT Toolkit for OCX 2000/XP Driver for LINUX Driver for Dasylab

Isolated Digital Input

• Number of channels: 32
• Type: photo coupler Isolated input
• Isolation Voltage: 3750V (using external power), 3000V (using internal power)
• Input voltage:
  Logic '1' = AC/DC 5V ~ 30V
  Logic '0' = AC/DC 0 ~ 1V
• Input impedance: 3 Kohm/ 0.25W
• Response time: 4KHz max.

Isolated Digital Output

• Number of Channels: 32
• Type: Isolated Open Collector
• Source current : 100mA/channel
• External Voltage : 30V max.
• Response Time: 30KHz max.

General

• Power Requirements: +5V@600mA
• Operating temperature: 0~60°C
• Storage temperature: -20°C~70°C
• Humidity: 0 ~ 90% RH, non-condensing
• Dimensions: 180 mm x 105 mm

Dig I/O Shortform Catalogue