PISO-A64 64Ch Isolated OC Digital Output Board(cur

The PISO-A64 is designed for use in PCI-Bus computers. The PISO-A64 has 64 channels of optically isolated digital outputs (current sourcing), arranged into four isolated banks.

Each digital output offers a PNP transistor and integral suppression diode for inductive load. All isolated output channels are designed into group A, B, C and group D. The power supply for the output port should use the external power. The board interface to field logic signals, eliminating ground-loop problems and isolating the host computer from damaging voltages.

The PISO-A64 has one 37-pin D-Sub Connector and one 40-pin male header. The 40-pin to DB37 flat cable is used to fix with the PC rear panel. The user can connect the digital signal through the second D-Sub connector. Each D-Sub connector contains 32 input channels.

Includes one CA-4037W cable (40-pin flat connector to 37-pin D-sub on Rear Panel) and two CA-4002 D-Sub connectors.

  • 32-bit +5V PC compatible PCI bus, Plug and Play
  • 64 Isolated Digital Output channels (current sourcing)
  • 3000Vdc Isolation Voltage
  • DC/DC converter built-in

Software

    • Toolkit for DOS
    • Toolkit for Windows 95/98
    • Toolkit for Windows NT
    • Toolkit for Windows 2000/XP
    • LabVIEW toolkit for Windows
    • Toolkit for OCX 95/98
    • Toolkit for OCX NT
    • Toolkit for OCX 2000/XP
    • Driver for LINUX
    • Driver for Dasylab

Isolated Digital Output

  • Number of Channels: 64
  • Type: Isolated Open Collector
  • Source current : 100mA/channel
  • External Voltage : 30V max.
  • Response Time: 30KHz max.

General

  • Power Requirements: +5V@800mA
  • Operating temperature: 0~60°C
  • Storage temperature: -20°C~70°C
  • Humidity: 0 ~ 90% RH, non-condensing
  • Dimensions: 180 mm x 105 mm
£153.00
PISO-A64 64Ch Isolated OC Digital Output Board(current sourcing)