

PIO-D64 64-channel Digital IO Board with Timer/Cou
The PIO-D64 provides 32 digital input channels, 32 output channels and 6 counter/ timer channels. The board consists of two 16-bit input ports and two 16-bit output ports.
The user can use the DB-16P to connect the input ports (CN2,CN4) for isolation purposes, or use DB-16R to interface to the output ports (CN1, CN3) for relay control. There are four-clock sources, 2M , 1M , 500K and 250K on the board. The user can use the clock source from the soldering pad. The on-board counter / timer provides 3 channels for frequency measurement, event counting and pulse generation. The second 8254 provides 3 channels for interrupt function.
This card can be installed in a 32-bit 5 V PCI bus and can support "Plug & Play".
NOW Universal PCI so can be installed in 3.3V or 5V bus PCI slots.
- 32-bit +5V PC compatible PCI bus, Plug and Play
- 32-channel digital input
- 32-channel digital output
- 3 independently programmable 16-bit down counters
- Four clock sources : 2M, 1M, 500K, 250KHz
- Three frequency divider: 100, 10 , 1
- One 16-bit counter and One 32-bit timer with 4 MHz time base
- Interrupt Source: timer, event or direct trigger
- One breadboard area for add-on circuitry.
- DIO response time is about 0.77 us (1.3 MHz max.)
- Double side SMT, short card
- Provides four 20-pin flat cable connector to DB-16P , DB-16R daughter board
- Programmable interrupt handling
- Five 20-pin headers
- Output status readback
Software
|
|
- Connectors: Five 20-pin ribbon male
- Input Logic high voltage : 2.4V min.
- Input Logic low voltage : 0.8V max.
- Input Load Current : -0.45mA min/ +70µA
- Output Sink Current : 24mA max.
- Output Source Current : -15mA max.
- Power Requirements : +5V@580mA
- Operating temperature : 0~60°C
- Storage temperature : -20~70°C
- Humidity : 0~90% RH, non-condensing
- Dimensions : 156mm x 110mm













