PIO-D56 56-channel Digital IO Board

• Description
• Features
• Specifications
• Technical

The PIO-D56 provides 24-bit bi-direction digital I/O and 16-bit digital inputs and 16-bit digital outputs. The 24-bit bi-direction digital I/O use 37-pin D-sub connector. The 16-bit digital I/O use 2off 20-pin header.

The 24-bit bi-direction digital I/O, consist of three 8-bit bi-direction ports. The 8-bit ports are named port A (PA), port B (PB), port C (PC) with all ports being configured as inputs upon power-up or reset.

This card can be installed in a 32-bit 5 V PCI bus and can support "Plug & Play".

NOW Universal PCI so can be installed in 3.3V or 5V bus PCI slots.  

• 32-bit +5V PC compatible PCI bus, Plug and Play
• Double side SMT, short card, power saving
• All I/O lines buffered on the board
• 24 channel digital TTL/DTL I/O Lines
• 16 Digital Inputs, 16 Digital Outputs
• 4 Interrupt sources: PC0, PC1, PC2, PC3
• One DB37 connector, two 20-pin headers
• High output driving capability
• No base address or IRQ switches to set.
• Automatically detected by Windows
• DIO response time is about 0.77 us (1.3 MHz max.)
• Direct Interface with OPTO-22 compatible I/O Modules

Software

• All I/O is TTL compatible
• Input Logic high voltage : 2.4V min.
• Input Logic low voltage : 0.8V max.
• OPTO-22 Output (CON3- DB37 connector) : 
  Output Sink Current : 64mA max.
  Output Source Current : 32mA max.
• 16-channel Output (CN1/2 - 20 way headers):
  Output Sink Current : 8mA max.
  Output Source Current : 0.4mA max.
• Power Requirements : +5V@580mA
• Operating temperature : 0~60°C
• Storage temperature : -20~70°C
• Humidity : 0~90% RH, non-condensing
• Dimensions : 143mm x 105mm

Dig I/O Shortform Catalogue