PISO-DA2 2Channel 12-bit isolated Analog Output Bo

The PISO-DA2 is a PCI bus analog output board with two output channels and isolated 12-bit resolution for IBM personal computer and compatibility. The output range can be configured as voltage output by one of the different ranges: ±10V, ±5V, 0~10V, 0~5V or current output using loop sink by the range: 0~20mA or 4~20mA. Besides, output channel is isolated each other and its isolation range is increased the voltage more than 3000Vdc. The output terminals of the PISO-DA2 are two sets of 9-pin D-type female connectors. PISO-DA2 can be installed in a 5V PCI slot and truly supports “Plug & Play” function of PCI-bus. The maximum conversion rate of the analog output is 10KS/s. It can be thought as the most cost-effective isolated D/A board for the PCI bus interface.
 
Includes two CA-PC09M D-Sub connectors.

 

  • Two independent 12-bit analog output channels
  • 3750Vdc isolation protection
  • 3000Vdc isolation DC/DC converter build-in
  • Software calibration
  • Unipolar or bipolar output available from each converter
  • Two pacer timer interrupt source
  • The voltage or current output can be set to arbitrary values or reset to zero when the power is on.
  • Double buffered D/A batches.
  • The calibration data is fully stored in EEPROM

Software

  • Toolkit for DOS
  • Toolkit for Windows 95/98
  • Toolkit for Windows NT
  • Toolkit for Windows 2000/XP
  • LabVIEW toolkit for Windows
  • Driver for LINUX

Analog Output Specifications

  • Channels: 32 Single Ended 
  • Resolution : 12-bit
  • Conversion Rate : 10 ks/s max.
  • Sampling Rate : 10 ks/s max.
  • Analog output range : Voltage output : Bipolar: ±10V, ±5V
                                                              Unipolar: 0~10V, 0~5V
                                      Current output : Current loop sink: 0~20mA, 4~20mA
  • Reference Voltage : Internal:-5V and -10V
                                  External: DC -5 and -10V
  • Current Loop Excitation Voltage : +8V~+36V
  • Isolation Voltage : 3750Vdc
  • Converter : AD7541 or equivalent
  • Trigger Mode : Software trigger
  • Data Transfer : Software control
  • Accuracy : 0.015% of reading FSR (Full Scale Range)
  • Linearity : ±1/2 LSB

General

  • I/O Connector : Two 9-pin D-type female connectors 
  • Power Requirements : +5V@860mA(Max.)
  • Operating temperature : 0~50°C
  • Storage temperature : -20~70°C
  • Humidity : 0~90% RH, non-condensing
  • Dimensions : 170mm x 122mm
£190.00
PISO-DA2 2Ch., 12-bit isolated Analog Output Board