PIO-DA16 16Ch., 14-bit Analog Output Board

The PIO-DA series are multi-channel D/A boards for the PCI bus for PC. The PIO-DA16/8/4/16U offer 16/8/4 channels double-buffered analog output. The output range may be configured in range: ±10V voltage output or 0~20mA current loop sink.
The boards are Jumperless and without trim-pot. Calibration is performed under software control eliminating manual trim-pot adjustments, calibration data is stored in EEPROM. Each channel can be selected as voltage or current output. 
The PIO-DA16U Universal PCI card supports both 5V and 3.3V, while the PIO-DA16/DA8/DA4 PCI card supports 5V PCI bus only. The PIO-DA16U (Universal PCI Version) is fully compatible with the PIO-DA16 (PCI Version), and also has an improvement in D/I pull-high/low design. The PIO-DA16U cards are designed as direct replacements to the PIO-DA16 cards for RoHS reason.

Note: This card needs a +12V power supply, which can be found in most regular PC's or Industrial PC's.
 Includes one CA-4002 D-Sub connector.

 

  • PCI bus interface for PIO-DA16/DA8/DA4
  • Universal PCI interface, supports both +5V and +3.3V PCI bus for PIO-DA16U
  • Digital input port can be set to pull-high or pull-low for PIO-DA16U
  • 16/8/4 channels, 14-bit analog output
  • Voltage output range ±10V
  • 0~20mA current sink to ground for each converter
  • Two pacer timer interrupt source
  • Double-buffered D/A latches
  • Software calibration
  • 16-channel DI, 16-channel DO
  • SMD, short card
  • One 37-pin D-Sub female connector, two 20-pin flat cable connectors
  • Connects directly to DB-16P, DB-16R, DB-24C, DB-24PR and DB-24POR
  • No base address or IRQ jumper need to set

Software

  • Toolkit for DOS
  • Toolkit for Windows 95/98
  • Toolkit for Windows NT
  • Toolkit for Windows 2000
  • Toolkit for Windows XP/2003/Vista 32-bit
  • LabVIEW toolkit for Windows
  • Toolkit for OCX 95/98
  • Toolkit for OCX NT
  • Toolkit for OCX 2000
  • Toolkit for OCX XP/2003/Vista 32-bit
  • Driver for DasyLab
  • Driver for LINUX

Analog Output Specifications

  • D/A Converter : Quad 14-bit MDAC
  • Channels: 16/8/4 Independant (depending on whether PIO-DA16,DA8 or DA4 boards) 
  • Resolution : 14-bit
  • Type: double-buffered, multiplying
  • Integral linearity : 0.006% FSR (typical)
  • Differential linearity : 0.006% FSR (typical)
  • Voltage output : Range : +10V ~ -10V
                             Current Drive : ±5mA
                             Absolute Accuracy : 0.01% FSR (typical)
  • Current output : Range : 0 ~ 20mA
                             Absolute Accuracy : 0.1% FSR (typical)
                             Excitation Voltage Range : +7V to +40V

Digital I/O

  • Input : 16-channel TTL levels
    Low : VIL = 0.8V max., IIL = -0.4mA max
    High : VIH = 2.4V min., IIH = 20µA max
  • Output : 16-channel TTL levels
    Low : VOL = 0.8V max., IOL = 8mA max
    High : VOH = 2.4V min., IOH = 0.4mA max

General

  • Interface : PIO-DA16/DA4/DA8 is PCI Bus, PIO-DA16U is Universal PCI 
  • Power Requirements : PIO-DA16 : +5V@1400mA(Max.)
                                        PIO-DA16U : +5V@1400mA(Max.)
                                        PIO-DA4 : +5V@600mA(Max.)
                                        PIO-DA8 : +5V@800mA(Max.)
  • Operating temperature : 0~50°C
  • Storage temperature : -20~70°C
  • Humidity : 0~90% RH, non-condensing
  • Dimensions : 180mm x 115mm
£395.00
PIO-DA16 16Ch., 14-bit Analog Output Board