I-8430 Embedded Controller - Ethernet : Slave - 4

The I-8430 is an ethernet embedded controller with 4 I/O slots which uses DCON Protocol Firmware. This unit supports the 8k series parallel I/O modules and 87k serial I/O modules, such as DI, DO, DIO, AI, AO, Counter/Frequency modules.

  • Supports IPv4
  • Supports the Ethernet or RS-232 communication interface.
  • Supports DCON communication protocol
  • Dual Bus designed to supports i-8K and i-87K series I/O modules, such as DI/DO, AI/AO, Counter/Frequency modules
  • Compact I/O Expansion slot allows the quick installation of various 8K and 87K I/O modules
  • By using the VxComm Utility, a PC can use a Virtual COM Port to communicate with the remote Ethernet I/O.
    Note: Remote Ethernet I/O must support XServer to use the Virtual COM Port function.
  • I/O configurable using DCON Utility via Ethernet port or RS-232 Port.
  • Firmware updated via the RS-232 port
  • Firmware auto scan AI modules and can map alarm to DO modules on the slots.
  • Dual Watch Dog mechanism enable i-8000 system can work reliably under harsh environment.
  • Ventilated housing designed to operate between -25°C to +75°C
  • DIN rail clips or Screw holes on each corner allow the control unit to be easily mounted
  • Frame Ground provides enhanced static protection (ESD) capability and ensures that the module is more reliable
  • Various SDKs provided ( free ) DLL, ActiveX, Labview driver, Indusoft driver, Linux driver, OPC server, etc

CPU

  • CPU : 80188,40MHz or compatible
  • SRAM : 512k
  • Flash Memory : 512k
  • EEPROM: 2k
  • Built-in Watchdog Timer : Yes

Communication Interface

  • COM0: Internal Communication with 87k modules
  • COM1: RS232 (to update firmware)
  • COM3: RS232/RS485
  • Ethernet Port : 10BaseT NE2000 compatible

SMMI (Small Man Machine Interface)

  • 5 digit LED Display
  • 3 programmable LED indicators
  • 4 push buttons

I/O Expansion Slots

  • 8430 : 4 slots

Other

  • Dimensions : 230x110x75.5 mm
  • Operating Temp.: -25°C to +75°C
  • Storage Temp. : -30°C to +85°C
  • Humidity : 5~95%, non-condensing
  • Power Protection : Power reverse polarity protection
  • Power Input : +10V to +30V dc
  • Power Supply : 20W
  • Power Consumption : 3.9W
£238.00
I-8430 Embedded Controller - Ethernet : Slave - 4 slot