Measurement Systems - forefront of the data acquisition market
Username: Password: Buy On-Line   
Products
CAN-8224 DeviceNet Embedded Device (2 I/O slot) £139.00

The CAN-8224 (I-8KDNS2) main control unit is specially designed to be a slave device of DeviceNet protocol. It follows the Specification of DeviceNet. In order to expand I/O channel more flexibly, an CAN-8x24 supports 1/2 slot(s) for I/O expansion and is compatible with a wide variety of ICP DAS DI/AI/DO/AO modules. Users can choose DI/DO/AI/AO modules of the i-87K series or i-8000 series to fit the customized application. In addition, we also provide CAN Slave Utility to allow users to create the EDS file dynamically. The EDS file is based on DeviceNet and can be compatible with different DeviceNet master interfaces. The application architecture is as shown on the image below. 

CAN-8x24 DeviceNet Embedded Device

 
Quantity:     

Features

  • DeviceNet version : DeviceNet specification Volume I & II, Release 2.0
  • Number of Nodes : 64 (max)
  • Baud Rate : 125k, 250k, 500k
  • Support Message Groups : Group 2 only server
  • UCMM : Not supported
  • I/O operating modes : Poll, Bit-strobe, change of state/cyclic
  • Device Heartbeat message : Yes
  • Device Shutdown message : Yes
  • Produce EDS file dynamically : Yes
  • No. of fragment I/O : 128 bytes (max) Input/Output
  • MAC I/D setting : Rotary Switch
  • Baud Rate setting : Rotary Switch
  • DeviceNet Status LED : NET, MOD, PWR
    		•

    Specifications

  • CPU : 80186-80MHz
  • Flash : 512K bytes
  • SRAM : 512K bytes
  • EEPROM : 2K bytes (Can upto 128K bytes or change to 2K/8K FRAM)
  • NVRAM : 32 bytes
  • Real Time Clock : 16 bit
  • Watch Dog Timer : CPU built-in
  • DeviceNet Status LED\'s : NET, MOD, PWR
  • CAN Connector : 5-pin screw terminal connector
  • CAN Controller : Philips SJA1000T CAN Controller
  • CAN Transceiver : Philips 82C250/251 CAN Transceiver
  • CAN 2.0A/2.0B supported
  • Isolation : 2500Vrms on CAN side
  • Termination resistor : 120 ohm selected by jumper
  • Transfer Rate : 125k, 250k, 500k
  • I/O Expansion port : 2
  • Power Supply : 20W unregulated +10Vdc to +30Vdc
  • Operating Temperature : -25C to +75C
  • Storage Temperature : -30C to +85C
  • Humidity : 5-95%
  • Dimensions : 115 x 110 x 75.5 mm
    		•

    Technical

    Quickstart Guide
    User Manual

    Applications

  • Control System
  • Building Automation
  • Factory Automation
  • Distributed data acquisition
  • Home Automation
  • Monitoring System
  • Vehicle Automation
  • Maritime
  • Restaurant Appliances
  • Industrial Machinery
  • Laboratory Equipment & Research
  • Medical
  • Specialty Vehicles
    		•

    Recommendations

    Power Supplies
    Terms of Use | Privacy Policy | Resources | How to Order | Site Map