I-7016 Strain Gauge Input Module (2 channel) Measurement Systems

I-7016 Strain Gauge Input Module (2 channel)

£152.00

This Strain Gauge Input module is ideal for small Strain Gauge Applications.

It also has an integral Digital Input channel to accept an input from a switch/relay or similar, along with 4 Digital Outputs which are useful for Alarm Output.

I-7016 Strain Gauge Input Module (2 channel)

Quantity:

Features

3000Vdc Isolated Analog Input

24bit Sigma-Delta ADC tp provide excellent accuracy

16 bit DAC supply excitation voltage for Strain Gauge

Software Calibration

Linear Mapping

Specifications

Analog Input

2 Analog Input Channels
Input Ranges : +/-15mV, +/-50mV, +/-100mV,+/- 500mV , +/-1V,+/- 2.5V, +/- 20mA
Sampling Rate : 10s/sec (1-channel mode)
2 s/sec (2-channel mode)
Accuracy : +/- 0.05% FSR
Over-Voltage Protection : 10V (P-P)

Excitation Voltage Output

1 Channel Excitation Voltage Output
Output Range : 0 to +10V
Max.Output Load : 40mA
Isolation : 3000Vdc

Digital Input

Channels = 1
Logic 0 = +1V max
Logic 1 = +3.5V to +30V
Max. Input Frequency = 50Hz
Min. Pulse Width = 1ms

Digital Output

Channels = 4
Output Type = Sink, Open collector to 30V
Output Load = 30mA max. per channel
Power Dissipation = 300mW

Other

Interface = RS485
Format : N,8,1
Baud Rate : 1200 - 115200 bps
LED Display = Power/Comms indicator
Power Input = +10V to +30V dc
Power Consumption = 2.4W
Operating Temp. = -25 to +75ºC
Storage Temp. = -40 to +85ºC
Humidity = 5 to 95%, non-condensing

Technical

User Manual

Applications

Small Strain Gauge Application

Structural Monitoring

Recommendations

Communications Units (to connect to host computer)
Power Supplies