CORAL-8041-16 Embedded SCADA Unit (0 slot/16 IO tags) Measurement Systems

CORAL-8041-16 Embedded SCADA Unit (0 slot/16 IO tags)

The CORAL-8041-16 solution consists of the CORAL unit without a backplane for plug-in I/O Cards and a SCADA Package which will handle up to 16 I/O tags. The software also includes 2 independent logfiles, 64 User Defined Analog Channels (for setpoints etc), 64 User Defined Digitals Channels (for virtual switches etc) and 64 Derived Calculator Channels for data manipulation. A single driver is included while various additional drivers are available as options.

The 0 Slot unit is ideal for applications that need no local I/O connections. It is to be used with other devices or if the data acquisition is needed closer to sensors that are spaced a distance apart. In this scenario you would use a distributed I/O system such as the I-7000 range. This could include use of ZigBee Converters or I/O units to provide a wireless network.

NOTE: This is just an example combination. CORAL is fully scalable and can be configured for specific requirements.

CORAL-8041-16 Embedded SCADA Unit (0 slot/16 IO tags)

Features

Low cost \"Ready to go\" solution for Data Acquisition, Logging and Control

Simple to use and configure

Wall or DIN rail mounting

Dual USB, Dual Ethernet and 3-4 Serial Ports (RS232/RS485) + VGA port

Redundant Power Inputs

Local or remote operation

Data can be stored on the units built-in 4Gb Flash disk (ideal for environments with a high level of vibration).
Optionally the data can be stored to a CF Card or USB Flash stick.

Compact and versatile

Ventilated housing allows the unit to operate between -25 and +75\'C.

Wide range of analog and digital sensor connections with signal conditioning

Available with 3 or 7 slot backplane to accept plug-in cards for local sensors.

0 Slot version available to connect to other devices or Distributed Data Acquisition Units only

Expandable from 8 to 10,000 inputs

Optional ZigBee Wireless Interface

Full Alarm and Data Management

Trend/Graph Displays and Configurable Displays

OPC client and single driver included

Options include:
Other standard drivers (e.g. Serial Device Driver, Modbus etc)
PID Control software
OPC Server software (publish logged data as OPC Tags; could be calculated values)
Internet Server (View all monitor screens in a web browser - unlimited users)
Full Client (View the monitor screens and configure the unit remotely)

Specifications

Software

16 I/O Tags
2 independent log-files
64 derived calculated channels
64 User Defined Analog channels
64 User Defined Digital Channels
Configure locally or via Remote Desktop (1 User, Windows XP or greater)
Operating System: Windows Embedded Standard 2009 (inc. SQL Server 2005 Express, Internet Information Service 5.1)

Hardware

CPU Module

CPU: AMD LX800 processor
System Memory: 1Gb DDR SDRAM
Dual Battery Backup SRAM: 512Kb (for 5 year data retention)
Flash: 4Gb as IDE master
EEPROM: 16Kb (data retention: 40 years; 1million erase/write cycles)
CF Card: 8Gb (supports up to 32Gb)
64-bit Hardware Serial Number: Yes
Dual Watchdog Timers: Yes
Rotary Switch: 0 ~ 9 (User Defined)

VGA & Communication Ports

VGA: resolution 640 x 480 ~ 1600 x 1200
Ethernet: RJ45 x 2, 10/100 Base-Tx (auto-negotiating, auto MDI/MDI-X, LED Indicators)
USB 2.0: 2 ports
COM1: RS232 (RxD,TxD and GND), non-isolated
COM2: RS232 (RxD,TxD and GND), non-isolated
COM3: RS485 (D2+, D2- ; self tuner ASIC inside) , 3000Vdc isolation
COM4: RS232/RS485 (RxD, TxD, CTS, RTS & GND for RS232 ; Data+ and Data- for RS485), non-isolated
COM5: RS232 (RxD, TxD, CTS, RTS, DSR, CD, RI & GND), non-isolated

Mechanical

Dimensions (W x L x H): 137 x 132 x 125 mm
Installation: DIN-Rail or Wall Mounting

Environmental

Operating Temperature: -25 to +75 °C
Storage Temperature: -30 to +85 °C
Ambient Relative Humidity: 5~90% RH, non-condensing

Power

Input Range: +10 to +30Vdc
Isolation: 1kV
Redundant Power Inputs: Yes, with one power relay (1A @ 24Vdc) for alarm
Capacity: 1.8A, 5V supply to CPU, total 15W
Consumption: 14.4W (0.6A @ 24Vdc)

Applications

Process Monitoring and Control

Quality and Batch Control Systems

Plant Utilisation and Efficiency

Environmental Monitoring and Management

Energy Management and Control Systems

Oil and Gas Well logging plus Rig Monitoring

Building Management Systems

Power Generation and Transmission

Mechanical and Electrical Test Systems

Steam Turbine Test Monitoring

Water and Waste Water Management

Laboratory Testing

Environmental Chamber Control

Recommendations

Software
Full Client software (view data in full client program; configure/monitor)
Internet Server (allow unlimited users access to your monitor pages)

OPC Server (publish captured data as OPC Data Tags)

PID Controller

Extra Drivers (1off driver provided with Server Licence).
Possible drivers include Modbus, Generic RS232 (record data from standard serial devices)

Hardware

Datascan 7000 (Versatile, individually configurable channels, high accuracy, stability and reliability; Good Noise Rejection with Isolated units available for harsher/noisier environments)
I-7000 : Distributed low cost RS485 based I/O Modules.
NOTE: All of the above Data Acquisition have units that will connect to most sensors.

Power Supplies
ZigBee Interfaces (Wireless networking - No need to run data cables to widely spaced sensor locations!)
GPRS Modems