7010 Measurement processor (No I/O on-board) Measurement Systems

7010 Measurement processor (No I/O on-board)

£725.00

The Datascan 7010 Measurement Processor module allows connection for a host computer or local display device to a Datascan 7000 Network at any point and provides the measurement facilities for connected scanner modules.

7010 Measurement processor (No I/O on-board)

Quantity:

Features

16 bit measurement performance with up to 0.625uV Sensitivity

isolated RS232 host communications port

isolated RS485 network interface for distribution over 1.2km

Local expansion bus for Datascan Scanner Expansion Modules ( 7020 / 7021 / 7027 / 7031 / 7035 / 7036 / 7050 ). Use Scanner modules to add up to 256 channels locally (up to a distance of 10m)

Use the network port to expand the system up to a maximum of 32 processors

Compact rugged DIN Rail mounting

On board non-volatile memory for storing unit configurations

Local Monitoring Facility

38.4 kBaud data transfer

Comprehensive range of built in software commands

500V Isolation from Network

14-bit mode for faster acquisition

Total channels possible on a single network is 1000

Specifications

RS485 Network
Transmission Rate : 93.75kBaud
Data Rate : 1000 results/sec
Total Channels/network : 1000
Max. No. of nodes (processors) : 32
Max. Network Length : 1.2 km (4000 ft)
Isolation : 500Vdc

RS232 Port
Baud Rates : 4800, 9600, 19k2, 38k4
Isolation : 500Vdc
Max Distance (direct) : 10m to host

Recommended Network Cable
Belden 9207 : upto 1.2km
Belden 8761 : upto 300m

Expansion Bus : 256 Analog or Digital channels
Max. Cable length : 10m

Measurement Speed
16 bit : upto 40 rdgs/sec
14 bit : upto 400 rdgs/sec

Power Requirements:
24V AC or DC @ 500mA
Battery Backup life : 5 Years (unpowered)

Dimensions : 230 W x 80 D x 123 H (mm)
Weight : 700g

Environmental:
Operating Temp.Range : -10 to +60 °C
Storage Temp. Range : -20 to +80 °C
Relative Humidity : 90% non-condensing

Technical

Most major SCADA packages support Datascan, an OPC Server is also available, please contact us for more information

7010 Datasheet [7010dsheet.pdf]
Datascan Brochure [DS7000bro.pdf]
Datascan User Guide [DSCANUSR.pdf]
Temperature Spec [TC.pdf]
Voltage Spec [VOLT994.pdf]

Applications

Temperature Monitoring

Factory Automation

general purpose Data Acquisition

Plant monitoring

Laboratory & University Experiments

Recommendations

Each Datascan 7010 unit includes :

All Plug in Connectors (except RS232),
Earth Wire (To link unit Earths),
Network Terminator,
Printed User Guide.

Recommended Products :